Calling the commercial dishwasher repairs is necessary when your dishwasher stopped working suddenly. There are some common problems that every dishwasher owner has to face. So learning about those dreadful situations can give you an extra advantage and you can act accordingly. You need to get prompt repair services as dishwasher is an important tool for your commercial business. So let’s check out, what are the situations or the symptoms that you need to call a repairman immediately.
When commercial dishwasher is not filling up
If the dishwasher is having a problem in filling up then it might the problem of clogged water intake valve or incoming water supply. When the float mechanism has any fault then you might have this problem. On the other hand due to the faulty pressure switch, timer switch or water inlet valve you can experience the problem and in this kind of situation you need to replace the malfunctioning parts.
When your dishwasher having problem in draining
A small amount of fresh water in the bottom of the dishwasher is normal but when you see that there is excessive dirty water is staged in the bottom then you may have a problem with your dishwasher draining line system and it is the time to call the commercial dishwasher maintenance service. Alternatively due to the clogged sink trap or drain valve you can experience the same.
When it is making a lot of noise
When the dishwasher is functioning normally, it emits a little bit of sound but if your machine is making sounds like loud buzzing or clunking or banging, then it may have some problem and it’s the time when you should contact your repair service immediately. These kinds of problems can cause due to the improper feet balancing or malfunctioning inlet valve.
When the dishwasher leaks
If you experience that at the time of running your machine is leaking water from the door vent then it’s better to call a repair service because these kinds of problems only happened when your dishwasher has a faulty gasket or door is tighten improperly. This problem can occur due to the faulty pump seals or leaky hoses and pipes too.
When your machine is not turning on
This problem generally happened due to the faulty electric connections so it’s better to call the expert to resolve the problem and if you are having a new machine and still this problem persists then ask for a replacement of the machine.
These are the problems which can be a nightmare for your business and thus, in order to get rid of them you should contact a good commercial dishwasher maintenance company without any delay.